Eleaf,
2. Drip a few drops of e-liquid into the atomizer head to fully saturate it before first use;
3. Screw the atomizer head into the tank, and put the bottom cover back to its original position;
4. Pull out the mouthpiece, and slowly fill e-liquid into the tank through either of the two holes on the sides; (Note: please do not overfill; please do not fill e-liquid into the center hole.) (Please refer to Picture 3)
5. Put the whole tank section back, let it sit for a few minutes and the iCare 2 is ready for use.
Power on/off: Press the button 5 times in quick succession within two seconds, and the indicator light will flash 3 times to show the device is powered on. In the same way, it can also be powered off.
Vaping: Keep holding the button to take a puff when the device is powered on. When vaping, the indicator light stays lit. The color of the indicator light changes according to the remaining battery capacity.
Charging: The device can be charged by connecting it with 1A wall adapter or computer via the USB cable. The charging indicator light is red during charging and goes out when fully charged.
Properties and Protections: Atomizer Protection: every time when vaping time exceeds 15 seconds, the indicator light flashes 4 times and the output cuts off automatically.
Short Circuit Protection: if short circuit occurs, the indicator light will flash 5 times and there will be no output.
Low Voltage Protection: when the voltage of the device is lower than 3.3V, the indicator light flashes 40 times and there is no output when vaping. Charge the device to reactivate it.
Resistance Detect: if the output load resistance is higher than 3.0ohm, the indicator light will flash slowly to indicate that no atomizer is detected when vaping; if the output load resistance is lower than 0.6ohm, the indicator light will flash 5 times to indicate a low output load or a short circuit when vaping.
We are not responsible for any damages caused by human error. Legal warranty is applied.
1. Please keep out of reach of children. 2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.
1. This product may be hazardous to health and contains nicotine which is addictive. 2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine
How to Use Eleaf iCare 2 Pod Kit - User Manual
How to Use iCare 2?
iCare 2 Pod Assembling:
1. Pull up the whole tank section, open the bottom cover of the tank with your fingernail in the direction of the arrow (please refer to Picture 2);2. Drip a few drops of e-liquid into the atomizer head to fully saturate it before first use;
3. Screw the atomizer head into the tank, and put the bottom cover back to its original position;
4. Pull out the mouthpiece, and slowly fill e-liquid into the tank through either of the two holes on the sides; (Note: please do not overfill; please do not fill e-liquid into the center hole.) (Please refer to Picture 3)
5. Put the whole tank section back, let it sit for a few minutes and the iCare 2 is ready for use.
Power on/off: Press the button 5 times in quick succession within two seconds, and the indicator light will flash 3 times to show the device is powered on. In the same way, it can also be powered off.
Vaping: Keep holding the button to take a puff when the device is powered on. When vaping, the indicator light stays lit. The color of the indicator light changes according to the remaining battery capacity.
Charging: The device can be charged by connecting it with 1A wall adapter or computer via the USB cable. The charging indicator light is red during charging and goes out when fully charged.
Properties and Protections: Atomizer Protection: every time when vaping time exceeds 15 seconds, the indicator light flashes 4 times and the output cuts off automatically.
Short Circuit Protection: if short circuit occurs, the indicator light will flash 5 times and there will be no output.
Low Voltage Protection: when the voltage of the device is lower than 3.3V, the indicator light flashes 40 times and there is no output when vaping. Charge the device to reactivate it.
Resistance Detect: if the output load resistance is higher than 3.0ohm, the indicator light will flash slowly to indicate that no atomizer is detected when vaping; if the output load resistance is lower than 0.6ohm, the indicator light will flash 5 times to indicate a low output load or a short circuit when vaping.
Warranty
We are not responsible for any damages caused by human error. Legal warranty is applied.
